有关板式橡胶支座的分析，这是我编的命令流

fhhaohao

/filename,laminated rubber bearing1
/title,ansys of laminated rubber bearing
/prep7
Wprota,,-90
Et,1,solid185
Mp,ex,1,1.24
Mp,prxy,0.4997

Et,2,solid45
Mp,ex,2,2.06e5
Mp,prxy,0.3
Block,0,1.75,0,2.5,0,0.025
Block,0,1.75,0,2.5,0.025,0.065
Block,0,1.75,0,2.5,0.065,0.175
Block,0,1.75,0,2.5,0.175,0.225
Block,0,1.75,0,2.5,0.225,0.335
Block,0,1.75,0,2.5,0.335,0.375
Block,0,1.75,0,2.5,0.375,0.485
Block,0,1.75,0,2.5,0.485,0.525
Block,0,1.75,0,2.5,0.525,0.635
Block,0,1.75,0,2.5,0.635,0.675
Block,0,1.75,0,2.5,0.675,0.7
Vglue,all
Save
/prep7
Lesize,all,,,10
Mshape,0,3D
Mshkey,1
Vmesh,all
/solu
Antype,static
/pnum,area,1
Aplot
Asel,s,Area,,62   
Nsla,s,1
D,all,all
Asel,s,area,,1   
Nsla,s,1
D,all,all
Asel,s,area,,62
Nsla,s,1
hao(409892511) 10:46:32
sf,all,pres,10
hao(409892511) 10:47:40
Solve
Finish
我想做一个有关板式橡胶支座的分析，这是我编的命令流，可是每次到运行solve命令时，总提示未响应。请问哪里出错了，谢谢了。

fhhaohao

求高手解答，谢谢了！