请教一个LS-DYNA的问题

sammy

　　/FILNAME,PENETRATION,0

　　ls-dyna (version 970 ) date 01/10/2005

　　*** Error line number 2 contains improperly formatted data

　　***********************************************line# 2

　　/TITLE,ANALYSIS OF PENETRATION

　　***********************************************************

　　*** Error reading 1st control card

　　E r r o r t e r m i n a t i o n

　　Memory required for explicit solution : 0

　　Additional dynamically allocated memory: 0

　　Total: 0

　　T i m i n g i n f o r m a t i o n

　　CPU(seconds) %CPU Clock(seconds) %Clock

　　----------------------------------------------------------------

　　Initialization ....... 1.0000E+00 100.00 1.8700E-01 100.00

　　Element processing ... 0.0000E+00 0.00 0.0000E+00 0.00

　　Binary databases ..... 0.0000E+00 0.00 0.0000E+00 0.00

　　ASCII database ....... 0.0000E+00 0.00 0.0000E+00 0.00

　　Contact algorithm .... 0.0000E+00 0.00 0.0000E+00 0.00

　　Contact entities ..... 0.0000E+00 0.00 0.0000E+00 0.00

　　Rigid bodies ......... 0.0000E+00 0.00 0.0000E+00 0.00

　　Implicit Nonlinear ... 0.0000E+00 0.00 0.0000E+00 0.00

　　Implicit Lin. Alg. ... 0.0000E+00 0.00 0.0000E+00 0.00

　　----------------------------------------------------------------

　　T o t a l s 1.0000E+00 100.00 1.8700E-01 100.00

　　Problem time = 0.0000E+00

　　Problem cycle = 0

　　Total CPU time = 1 seconds ( 0 hours 0 minutes 1 seconds)

　　CPU time per zone cycle = 0 nanoseconds

　　Clock time per zone cycle= 0 nanoseconds

　　Number of CPU's 1

　　NLQ used/max 96/ 96

　　Start time 06/08/2006 10:34:41

　　End time 06/08/2006 10:35:03

　　Elapsed time 22 seconds ( 0 hours 0 minutes 22 seconds)

　　E r r o r t e r m i n a t i o n

　　这是后来MESSAGE里面的，那里出了问题呢

zhangmeng

好像是接触定义有了问题