声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 2210|回复: 2

[求助]请教一个关于ansys建模的问题

[复制链接]
发表于 2005-9-10 17:22 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
Boolean operation failed. Try adjusting the tolerance value on the BTOL command to some fraction of the minimum keypoint distance. Model Size (current problem)4.451204e-002, current BTOL setting 1.000e-005, minimum KPT distance 5.984424e-006.<BR>想问下,这个问题该怎么处理,我想把两个体加在一起,该怎么设置才行? <BR>

本帖被以下淘专辑推荐:

回复
分享到:

使用道具 举报

发表于 2005-9-10 20:10 | 显示全部楼层

I am a real rookie on ansys.Im glad to exchange my view with everyone.

<P>Im glad  to exchange my view  with everyone.<BR>I'm sorry that i can't understand your problem clearlly on following two points:<BR>first,the exact location of the two poits of your solid  model in your problem<BR>second, IN ANSYS,THE POINT COINCIDENCE TOLERANCE CAN BE  ADJUSTED AUTOMATICALLY,BUT WHY DOESN'T IT WOK IN YOUR PROBLEM.<BR><BR><BR>SUGGESTION:MAY BE YOU CAN SET THE TORLERANCE A BIT LARGER.<BR><BR>I am a real rookie on ansys.</P>
发表于 2005-9-11 08:43 | 显示全部楼层
<P>另一个建议,检查你的几何模型,那里可能有问题。<BR><BR>如果不介意的话发一张图上来看看</P>
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-11 03:49 , Processed in 0.146702 second(s), 20 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表