声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 2601|回复: 1

simulink问题: update your model with the psbupdate function

[复制链接]
发表于 2006-12-4 08:26 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
当输入simupowersystems/extra library/中的模块时老提示"You are working with an old simupowersystems version 2 model.Please update your model with the psbupdate function.",并且所显示模块无法和其它模块连线,是什么原因呢?怎么解决呢?多谢高手了!!:'(
回复
分享到:

使用道具 举报

发表于 2006-12-6 21:51 | 显示全部楼层
在help-〉search里输入psbupdate搜一下相关帮助就清楚了,下面是其中的头条

Using the psbupdate Command

The psbupdate command converts models built with Version 2 blocks into the Physical Modeling block diagram interface and library of SimPowerSystems 3.1. The conversion happens in three steps: powerlib blocks replace Version 2 powerlib2 blocks. The block ports are sometimes reordered. Physical Modeling connection lines replace Simulink signal lines, if those lines connect the new Physical Modeling electrical terminal ports on the converted blocks. Special JunctionPoint blocks are inserted at line branch points. Subsystem ports are converted, if necessary, to the new Connection Port blocks. See Terminal Ports for the Electrical Domain of Physical Modeling and Special Conversion Blocks and Retired Version 2 Blocks.

The conversion can fail to convert and reconnect some connection lines. See Repairing Incomplete Connection Lines. The psbupdate function changes the name of your model to <oldmodelname>_updated and saves it under this name so you can easily refer to the original model if you need to reconnect broken lines.
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-11 07:27 , Processed in 0.058460 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表