宏命令应用

john152 · 发表于 2008-9-4 17:22

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？我要加入

x

我用范成建《虚拟样机软件MSC.ADAMS应用与提高》中关于用宏命令建立齿轮的应用，
出现三个同样类型的错误：
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 123, character 6 of poly_gear.cmd.
ERROR: No Reference_Frame was found because 'close' does not exist beneath '.gear_5'.
ERROR: The command was not executed.
ERROR: &> close=yes relative_to=.gear_5.PART_2.MARKER_1
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: No Wire_Geometry was found because 'tmp_poly' does not exist beneath '.gear_5.PART_2'.
ERROR: The command was not executed.
ERROR: &> .gear_5.PART_2.gear1  profile_curve=tmp_poly&
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: No Geometry was found because 'tmp_poly' does not exist beneath '.gear_5.PART_2'.
ERROR: The command was not executed.
ERROR: >> geometry delete geometry_name=tmp_poly
ERROR: ---------------------------------------------------------------------

请宏高手指点！
涉及到的宏命令只有三行（红字部分）：
file text write&
   format_for_output="close=yes relative_to=%s"&
   values_for_output=($center_marker) newline=yes

file text close

variable delete variable=$_self.inc
variable delete variable=$_self.a_inc,$_self.num_teeth,&
   $_self.out_rad,$_self.in_rad,$_self.out_rad2

file command read file_name=poly_gear

geometry create shape extrusion extrusion_name=&
$ref_part_name.$gear_name profile_curve=tmp_poly&
reference_maker=$center_maker length_along_z_axis=$thickness
geometry delete geometry_name=tmp_poly

命令全文见附件

gear_create.txt (4.45 KB, 下载次数: 6)

账号		自动登录	找回密码
密码			我要加入

[ADAMS专区] 宏命令应用

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。