声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 1359|回复: 0

[基础理论] table表中的数据?

[复制链接]
发表于 2009-1-15 15:30 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
/batch,list
/verify,dv-1101c
/title, dv-1101c, Flotran Remeshing: Cylinder pass through a channel
/COM,****************************************************
/COM,* Cylinder pass through a channel (pure fluid flow)
/COM,* Verify partial domain re-meshing
/COM,****************************************************
r1 = 2.5
l1 = 5.0
l2= 20.0
l3=60.0
h = 10.0
rx0= l1+(l2-l1)/2.0
ry0 = h/2.0
nl1 = 5
nl3 = 10
nr=8
nc=8
/PREP7


*DEL,_FNCNAME   
*DEL,_FNCMTID   
*DEL,_FNC_C1
*SET,_FNCNAME,'DIS'
*DIM,_FNC_C1,,1
*SET,_FNC_C1(1),1.0
! /INPUT,force.func
*DIM,%_FNCNAME%,TABLE,6,3,1
!   
! Begin of equation: a*{TIME}   
*SET,%_FNCNAME%(0,0,1), 0.0, -999   
*SET,%_FNCNAME%(2,0,1), 0.0
*SET,%_FNCNAME%(3,0,1), %_FNC_C1(1)%
*SET,%_FNCNAME%(4,0,1), 0.0
*SET,%_FNCNAME%(5,0,1), 0.0
*SET,%_FNCNAME%(6,0,1), 0.0
*SET,%_FNCNAME%(0,1,1), 1.0, -1, 0, 1, 17, 3, 1
*SET,%_FNCNAME%(0,2,1), 0.0, 99, 0, 1, -1, 0, 0
*SET,%_FNCNAME%(0,3,1),   0
! End of equation: a*{TIME}
!-->

RECTNG,0,l1,0,h,  
RECTNG,l1,l2,0,h,  
RECTNG,l2,l3,0,h,  
aglue,all   

CYl4,rx0,ry0,0,45,r1,135   
CYl4,rx0,ry0,0,135,r1,225   
CYl4,rx0,ry0,0,225,r1,315   
CYl4,rx0,ry0,0,315,r1,405   
asel,s,,,2
asel,a,,,3
asel,a,,,6
asel,a,,,7
allsel,below,area
aglue,all
allsel
FLST,3,4,5,ORDE,3   
FITEM,3,2   
FITEM,3,8   
FITEM,3,-10
ASBA,       4,P51X
aplot

et,1,141
KEYOPT,1,4,1
type,1
mat,1
asel,s,,,1
esize,.5
mshape,1,2d
mshkey,0
amesh,all

et,2,141
KEYOPT,2,4,1
type,2
mat,1
asel,s,,,3
esize,.5
mshape,1,2d
mshkey,0
amesh,all

et,3,141
KEYOPT,3,4,1
type,3
mat,1
asel,s,,,5
esize,2.0
mshape,1,2d
mshkey,0
amesh,all
nsel,s,loc,x,0
D,ALL,VX,0.0,
D,ALL,VY, 0.0
D,ALL,UX,0.0,
D,ALL,UY, 0.0
nsel,s,loc,x,l3
D,ALL,pres,0.0
D,ALL,UX,0.0,
D,ALL,UY, 0.0
nsel,s,loc,y,0
D,ALL,vy,0.0
D,ALL,UX,0.0,
D,ALL,UY, 0.0
nsel,s,loc,y,h
D,ALL,vy,0.0
D,ALL,UX,0.0,
D,ALL,UY,0.0,
lsel,s,,,5
lsel,a,,,23
lsel,a,,,25
lsel,a,,,27
nsll,s,1
d,all,UX,%DIS%
d,all,UY,0.0
d,all,VX,1.0
d,all,VY,0.0
allsel
cdwrite,db,fluid,cdb,
fini
! Flotran Setup
/solu
FLDATA30,QUAD,MOMD,2,   
FLDATA30,QUAD,MOMS,2,   
FLDATA30,QUAD,PRSD,2,   
FLDATA30,QUAD,PRSS,2,   
FLDATA30,QUAD,THRD,0,   
FLDATA30,QUAD,THRS,0,   
FLDATA30,QUAD,TRBD,0,   
FLDATA30,QUAD,TRBS,2,   
/solu
FLDATA4,TIME,NUMB,100000,   
FLDATA4,TIME,TEND,44.0,

FLDA,SOLU,ALE,T                ! ALE solution
FLDATA1,SOLU,FLOW,1
FLDATA1,SOLU,TRAN,1
!FLDATA1,SOLU,TURB,1
FLDATA2,TIME,GLOB,5

FLDATA7,PROT,DENS,CONSTANT
FLDATA8,NOMI,DENS,1.0
FLDATA7,PROT,VISC,CONSTANT
FLDATA8,NOMI,VISC,1.0
!FLDA,BULK,BETA,1.0e5
FLDA,TIME,STEP, 2.0
!
!!! Newmark method
!
FLDATA,OUTP,TAUW,T
FLDATA,TIME,METH,NEWM
FLDATA,TIME,DELT,0.5
!
!! Set ANSYS-STRUCTURE commands
SAVE
/COM
/COM  Re-meshing Commands
/COM
FLDATA,REMESH,ELEM,ALL        ! all defined element re-meshing
FLDATA,REMESH,ARMA,10.0       ! maximum aspect ratio
FLDATA,REMESH,VOCH,5.0        ! maximum volume change
FLDATA,REMESH,ARCH,5.0        ! maximum aspect ratio change
SOLVE
SAVE
finish
哪位知道定义的table里的数据分别代表什么?
回复
分享到:

使用道具 举报

您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-11 01:04 , Processed in 0.084370 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表