Ramped Effects, No Ramping, 这两个是什么东西???

SANYAN68 · 发表于 2011-4-24 13:48

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？我要加入

x

This setting is useful to make sure initial contact occurs even if any gaps are present (as long as they are within the pinball region). Without using this setting, the bodies may fly apart if any initial gaps exist. Although any initial gaps are ignored, gaps can still form during loading for the nonlinear contact types. This treatment is used inherently for the linear contact types (Bonded and No Separation), which is the reason why Interface Treatment is not displayed for these contact types. For nonlinear contact types (Frictionless, Rough, and Frictional), Interface Treatment is displayed where the choices are Adjust to Touch, Add Offset, Ramped Effects, and Add Offset, No Ramping.

-------------------------------------------------------------------------------

Ramped Effects,

No Ramping,

这两个是什么东西???

16443 · 发表于 2011-4-24 16:33

Add Offset, Ramped Effects 以斜坡方式施加偏移
Add Offset, No Ramping. 以阶跃方式（step）施加偏移

SANYAN68 · 发表于 2011-4-25 15:26

本帖最后由 SANYAN68 于 2011-4-25 15:35 编辑

16443 发表于 2011-4-24 16:33

登录/注册后可看大图

Add Offset, Ramped Effects 以斜坡方式施加偏移
Add Offset, No Ramping. 以阶跃方式（step）施加偏移

麻烦解释一下! 什么是.......(最好有图)
Add Offset, Ramped Effects 以斜坡方式施加偏移
Add Offset, No Ramping. 以阶跃方式（step）施加偏移

No Ramping > 应该翻译成 "无"斜坡吧?

账号		自动登录	找回密码
密码			我要加入

[结构分析] Ramped Effects, No Ramping, 这两个是什么东西???

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。