|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?我要加入
x
本帖最后由 SANYAN68 于 2011-4-25 16:46 编辑
This setting is useful to make sure initial contact occurs even if any gaps are present (as long as they are within the pinball region). Without using this setting, the bodies may fly apart if any initial gaps exist. Although any initial gaps are ignored, gaps can still form during loading for the nonlinear contact types. This treatment is used inherently for the linear contact types (Bonded and No Separation), which is the reason why Interface Treatment is not displayed for these contact types. For nonlinear contact types (Frictionless, Rough, and Frictional), Interface Treatment is displayed where the choices are Adjust to Touch, Add Offset, Ramped Effects, and Add Offset, No Ramping.
-------------------------------------------------------------------------------
Interface Treatment
要怎么翻译? 是什么东西??? |
|