第二张图里的
Overlap Failed
If an Overlap Failed message is received (and the analyzer is shown in grey in the Measurement Organiser), this means that the analysis has not been performed according to the overlap specifications. PULSE will, however, continue averaging until the measurement is complete. That is, the measurement time will be extended. It is then up to you to decide whether the data can be used.
To avoid the problem, you need to reduce the channel ´ bandwidth product (or increase the real-time processing power of your system by adding an Analysis Engine) or reduce the overlap. You will receive a message if the measurement requirements exceed the system capabilities when you activate the measurement. In this case, reducing the number of channels, overlap or order span may help.
这是pulse 帮助里的内容 |
发表于 2011-5-21 09:03
提升卡
变色卡
显身卡
楼主
发表于 2011-5-23 14:33
