声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 5613|回复: 1

[Workbench] 静态分析求解时出现两处错误?请各位高手帮忙看看!

[复制链接]
发表于 2012-7-6 17:18 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
(1)Error: An internal solution magnitude limit was exceeded. Please check your Environment for inappropriate load values or insufficient supports.  Also check that your mesh has more than 1 element in at least 2 directions if solid brick elements are present.  Please see the Troubleshooting section of the Help System for more information.
(2)Warning: Solver pivot warnings have been encountered during the solution.  This is usually a result of an ill conditioned matrix possibly due to unreasonable material properties, an under constrained model, or contact related issues.  Check results carefully.        Project>Model>Static Structural>Solution        7/6/2012 5:07:54 PM
回复
分享到:

使用道具 举报

发表于 2012-7-7 08:22 | 显示全部楼层
检查各接触面边界条件,确认没有多余的free自由度
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-8 14:50 , Processed in 0.062762 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表