查看: 236|回复: 2

[结构分析] workbench中integration point results中的选择

[复制链接]
发表于 2016-9-17 23:07 | 显示全部楼层 |阅读模式
10体能
       在workbench中进行静力分析时,在查看结果时,有一个integration point results选项 integration.png ,一般选择哪个结果

回复
分享到:

使用道具 举报

发表于 2016-9-22 16:08 | 显示全部楼层
一般选 averaged 默认的。

Unaveraged: Displays unaveraged results.
Averaged: Displays averaged results.
Nodal Difference: Computes the maximum difference between the unaveraged computed result (for example, total heat flux, equivalent stress) for all elements that share a particular node.
Nodal Fraction: Computes the ratio of the nodal difference and the nodal average.
Elemental Difference: Computes the maximum difference between the unaveraged computed result (for example, total heat flux, equivalent stress) for all nodes in an element, including midside nodes.
Elemental Fraction: Computes the ratio of the elemental difference and the elemental average.
Elemental Mean: Computes the elemental average from the averaged component results.

点评

这都是什么啊  详情 回复 发表于 2016-9-23 09:04
回复

使用道具 举报

发表于 2016-9-23 09:04 | 显示全部楼层
Fancredit 发表于 2016-9-22 16:08
一般选 averaged 默认的。

Unaveraged: Displays unaveraged results.

这都是什么啊
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

快速回复 返回顶部 返回列表