请教:这样的警告如何避免

lzq8281 · 发表于 2007-3-5 21:07

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？我要加入

x

本人初用Anasys/LS-DYNA,定义材料接触后,求解过程为什么会出现如此多的警告,我也不知道哪出现问题,限于篇幅,只列一段如下:
** Warning Initialization
single surface interface # =       2
penetrating node #       =    385
segment #                =    45
penetration             = -0.2250598E+00
s,t                      = 0.2753794E+00  0.1000000E+01
penetrated segment nodes:
   4075    4079    4080    4076
original coordinates of slave node=    385
            x-coordinate       = 0.749505997E+01
            y-coordinate       = 0.487923098E+01
            z-coordinate       = 0.500000000E+00
modified coordinates of slave node=    385
            x-coordinate       = 0.726999950E+01
            y-coordinate       = 0.487923098E+01
            z-coordinate       = 0.500000000E+00

*** Warning Initialization
single surface interface # =       2
penetrating node #       =    386
segment #                =    45
penetration             = -0.2250598E+00
s,t                      = 0.2753794E+00 -0.1000000E+01
penetrated segment nodes:
   4075    4079    4080    4076
original coordinates of slave node=    386
            x-coordinate       = 0.749505997E+01
            y-coordinate       = 0.487923098E+01
            z-coordinate       = 0.333333313E+00
modified coordinates of slave node=    386
            x-coordinate       = 0.726999950E+01
            y-coordinate       = 0.487923098E+01
            z-coordinate       = 0.333333313E+00
望哪位高手帮忙,不甚感激

账号		自动登录	找回密码
密码			我要加入

[材料与接触] 请教:这样的警告如何避免

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。