声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 2727|回复: 3

请教导入*.inp文件时出现的问题

[复制链接]
发表于 2007-5-23 11:18 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
在导入*.inp文件时,在信息栏出现以下问题,提交分析作业后,对INP文件的预处理没有通过,请问如何解决?
A new model database has been created.
The model "Model-1" has been created.
The model "Job-100" has been created.
The part "TOOL-MESH-1" has been imported from the input file.
The part "WORKPIECE-MESH-1" has been imported from the input file.
WARNING: Node-based surfaces are not yet supported in ABAQUS/CAE. The following node sets have been created in place of the corresponding node-based surfaces so they can be used in ABAQUS/CAE.
Node Set Created            Node-Based Surface  
------------------          --------------------
    CHIP_CNS_                    CHIP_CNS_
    WORKPIECESURFACE_CNS_        WORKPIECESURFACE_CNS_
The interaction property "FLAKE-WP" has been created.
The interaction property "RAKE-WP" has been created.
The interaction property "SELF-CONTACE" has been created.
The interaction "FLAKE-WP-1" has been created.
The interaction "RAKE-WP-1" has been created.
The interaction "SELF-CONTACT-1" has been created.
WARNING: The following keywords/parameters are not yet supported by the input file reader:
---------------------------------------------------------------------------------
*SECTIONCONTROLS, ELEMENTDELETION
The model "Job-100" has been imported from an input file.
Please scroll up to check for error and warning messages.
回复
分享到:

使用道具 举报

发表于 2007-5-23 14:40 | 显示全部楼层
*SECTIONCONTROLS, ELEMENTDELETION
这一句abaqus不认识
可能是大小写或空格的问题

评分

1

查看全部评分

发表于 2007-5-30 12:43 | 显示全部楼层
有些关键字在CAE中是不支持,如要再次添加到keywords中。
发表于 2011-3-30 13:53 | 显示全部楼层
里面不是提示了么?基于节点定义的平面不为 ABAQUS/CAE所支持。
Node-based surfaces are not yet supported in ABAQUS/CAE. The following node sets have been created in place of the corresponding node-based surfaces so they can be used in ABAQUS/CAE.
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-13 12:27 , Processed in 0.074107 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表