从水中减去一个体!布尔运算总是出现问题
将 BTOL 调到 8E-1时 ,出现:
*** ERROR *** CP = 86.984 TIME= 09:53:29
Current ANSYS geometry failed to support boolean operations. See list
error window for details. Non-standard BTOL of 8.000000e-001 was used
internally - try changing BTOL to default or new value.
将 BTOL 调到 7.5E-1 ,出现:
*** ERROR *** CP = 88.031 TIME= 09:54:15
Boolean operation failed. Try adjusting the tolerance value on the
BTOL command to some fraction of the minimum keypoint distance.Model
Size (current problem) 4.593474e+001, current BTOL setting
7.500000e-001, minimum KPT distance 1.799460e-001.