平板加载温度分布

haiwen5668

对一个矩形平板，温度分布通过建模已经得到，如何在ansys有限元模型中加载温度分布函数，从而获得应力分布啊～～～～～～
本人是菜鸟，刚看了ansys两天又两小时，恳请高手指点啊！！谢谢。

板长R=4.160m；高L=1.710m；板线膨胀系数为 13.23×10-6m/m·℃；杨氏弹性模量1.88×1011Pa；泊松比0.26，导热系数50W/(m·k),认为温度只与高度有关，温度分布函数已经建模求得：
t=-3.1309y4+8.8505y3-40.924y2+126.94y+254.53.
我编程试了下，总是有问题，哪位高手做个示范啊（大约三四十行程序的样子），谢谢！！！
我的QQ：544627372...........................................

haiwen5668

先自己顶个，高手救我～～～～多谢

yagn

A coupled-field analysis usually involves applying results data from one analysis as loads in a second analysis. For example, you can apply the nodal temperatures calculated in a thermal analysis as body loads in a structural analysis (for thermal strain). Similarly, you can apply magnetic forces calculated in a magnetic field analysis as nodal forces in a structural analysis. To apply such coupled-field loads, use one of the following: Command(s):  LDREAD
GUI:  Main Menu> Preprocessor> Loads> Define Loads> Apply> load type> From source
Main Menu> Solution> Define Loads> Apply> load type> From source  


See the Coupled-Field Analysis Guide for details about how to use this command in different types of coupled-field analyses.

haiwen5668

谢谢！问题基本解决～～
谢谢～