声振论坛

 找回密码
 我要加入

QQ登录

只需一步,快速开始

查看: 13448|回复: 6

大家来指点下---ABAQUS运行时错误,怎么办?

[复制链接]
发表于 2008-5-17 15:57 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?我要加入

x
58 nodes are used more than once as a slave node in *TIE keyword. These constraints are not removed either due to the presence of *CONSTRAINT CONTROLS,NO CHANGES keyword or because removing the constraints might affect the model. The nodes have been identified in node set ErrNodeOverconTieSlave.
82160 elements have missing property definitions. The elements have been identified in element set ErrElemMissingSection.
The number of history output requests has exceeded 10000, the value of the ABAQUS variable 'max_history_requests.' Reduce the number of requests, increase the value of this variable, or deactivate this test by setting 'max_history_requests=0' in the abaqus_v6.env file. Significant performance problems will occur if these requests are maintained. Consider requesting specific tensor components or requesting field output from which history data may be extracted.
Analysis Input File Processor exited with an error.
回复
分享到:

使用道具 举报

发表于 2008-5-19 09:16 | 显示全部楼层
某个单元集合在tie中重复充当从节点,这样无法约束
你应该实现建立约束链条
 楼主| 发表于 2008-5-21 20:34 | 显示全部楼层

谢谢主任

我修改了,还是有错,2 nodes are used more than once as a slave node in *TIE keyword. These constraints are not removed either due to the presence of *CONSTRAINT CONTROLS,NO CHANGES keyword or because removing the constraints might affect the model. The nodes have been identified in node set ErrNodeOverconTieSlave.
24306 elements have missing property definitions. The elements have been identified in element set ErrElemMissingSection.
The elset or tracer set parameter is required on the *element output option for this output database history request
Analysis Input File Processor exited with an error.
我的inp文件太大了,传不上来——让您看错误,这不我快要被炒了。。。
发表于 2008-5-28 11:03 | 显示全部楼层

同问

Warning:   Not all the nodes that have been adjusted are printed.
Errors:
8 nodes are used more than once as a slave node in *TIE keyword. These constraints are not removed either due to the presence of *CONSTRAINT CONTROLS,NO CHANGES keyword or because removing the constraints might affect the model. The nodes have been identified in node set ErrNodeOverconTieSlave.

Analysis Input File  Processor exited with an error.

[ 本帖最后由 zjxinyan 于 2008-5-28 11:06 编辑 ]
发表于 2008-5-28 11:04 | 显示全部楼层

若有人能帮忙,我上传下inp文件。谢谢!

若有人能帮忙,我上传下inp文件。谢谢!
发表于 2008-6-19 21:37 | 显示全部楼层
检查一下是否定义了共用一条线的两个面,选其中一个面删除沿线的网格。第二,发现可能一个部件没有定义材料属性。
发表于 2013-1-4 16:38 | 显示全部楼层
我也遇到了这样的问题,
约束绑定,是否关键是如何选择主面和从面呢
您需要登录后才可以回帖 登录 | 我要加入

本版积分规则

QQ|小黑屋|Archiver|手机版|联系我们|声振论坛

GMT+8, 2024-11-24 21:29 , Processed in 0.059173 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表