Dynamic Signal Analysis from m+p international

sushi

Scalable Dynamic Signal Analysis from m+p international
Booth # 309 at IMAC, 9-12 February 2009, Orlando, FL

13 January 2009

Please visit m+p international at the IMAC XXVII Conference and Exposition from 
February 9 to 12, 2009 to see the latest features of our SO Analyzer products 
for dynamic signal analysis with channel counts from 4 channels to thousands:
New support of VibPilot USB 2.0 front-end with 2 sources, 2 tacho inputs and from 
4 to 16 channels.
Also supports National Instruments (PXI, PCI, and USB),  VXI-based ProDAQ and VXI Technology VT143X.



Application support independent of hardware front-end allows upgrading while preserving your investment.
Multichannel FFT and time data acquisition including unlimited throughput to disk acquisition with scheduled recording, analysis of large measured or imported data files, user programming, calculator, comprehensive automated test reporting.
Modal analysis including multiple references, stepped sine, closed loop sine with source types sine, random, burst random, sine sweep, arbitrary waveform, pseudo-random, periodic-random. Advanced mode indicator and curve fit including operating modal.
Rotating machinery including support for hardware tachos as well as input channels as tacho, resampling, spline fit wizard for creating rpm vs time curves from data sources ability to store raw tach times for shaft torsion analysis and real time displays.
Acoustic analysis including real time 1/nth octaves, sound power, sound level meter modes, acoustic intensity.
Sound quality analysis including sound card playback and filtering and SQ metrics loudness, roughness, sharpness and articulation index.
Pass-by-noise testing: Complete turnkey single driver system for capturing vehicle (auto, rail, aircraft, water craft, and recreational vehicle) pass-by-noise. Utilizing wireless laptop based acquisition system and GPS positioning and speed to enable operation in minutes from any site.


m+p international Booth # 309

We would be pleased to see you at the IMAC Exposition.

OR

Write: sales.na@mpihome.com
Call: (973)239-3005

Our product reputation and broad experience coupled with valuable user feedback, extensive support and service capabilities have led to significant market share in numerous key industries worldwide. m+p international has its headquarters in Hannover, Germany with subsidiaries in New Jersey, England, France, China and Singapore along with representatives and agents throughout the world.