[求助]大家帮我看看代码,谢谢

nobita

<P>/PREP7<BR>EMUNIT,MKS<BR>RECTNG,0,0.05,-0.03,0.04 !铸件<BR>RECTNG,0.055,0.085,0.01,0.04 !线圈<BR>CYL4,0,0,0,-90,0.2,90 !远场   <BR>CYL4,0,0,0,-90,0.15,90 !空气  <BR>ASEL,ALL<BR>AOVLAP,ALL<BR>NUMCMP,ALL<BR>/PNUM,AREA,1 !几何造型完毕<BR><BR>MP,MURX,1,1 !空气,远场<BR>MP,MURX,2,1 !铸件<BR>MP,MURX,3,1 !线圈 <BR>!材料定义完毕 <BR>ET,1,PLANE53,,,1 !空气,铸件 <BR>ET,2,PLANE53,1,,1 !载流线圈  <BR>ET,3,INFIN110,,,1 !远场<BR>!单元定义完毕<BR>ESIZE,0.004<BR>TYPE,1<BR>MAT,2<BR>AMESH,3<BR>ESIZE,0.003<BR>TYPE,2<BR>MAT,3<BR>AMESH,1<BR>ESIZE,0.005<BR>TYPE,1<BR>MAT,1<BR>AMESH,4<BR>ESIZE,0.005<BR>TYPE,3<BR>MAT,1<BR>AMESH,2<BR>/PNUM,MAT,1<BR>!网格划分完毕<BR>CSYS,1<BR>NSEL,S,LOC,X,0.2<BR>SF,ALL,INF !设置无限表面<BR>CSYS,0<BR>NSEL,S,LOC,X,0<BR>D,ALL,AZ,0 !磁力平等边界条件        <BR>NSEL,ALL<BR>FINISH</P>
<P>/SOLU<BR>ANTYPE,HARM<BR>ESEL,S,MAT,,3<BR>BFE,ALL,JS,,10 !加电流10A  <BR>ESEL,ALL<BR>HARFRQ,20 !频率20    <BR>SOLVE<BR>FINISH<BR>到这里就结束了,然后是不是改查看结果"general postproc"了?但是什么结果都没有啊,谁能帮我修改一下,不胜感激,</P>
<P>估计是我给载流线圈加载有误.</P>

AaronSpark

家里的机器没装ansys 不好意思

AaronSpark

可以自己一步步的运行检查